BSE Commercial Electric tank Type Water Heaters

Product Features：                                                                          

●  Advanced Electronic Control

LCD liquid crystal display, simple operation.Equipped with LCD backlight can also display setting value and the current value. The temperature control range, provides precise + or - 1ºF temperature control, that is ideal for industrial and food service applications where

exact temperatures of hot water are needed.

●  Progressive Modulating

    Sizes the input of available elements to match current load conditions. Rotates and lead lags element loads to provide long life and equal wear.

• Low Water Cut Off

Factory standard on board low water cut-off uses a remote electronic immersion type probe to prevent energizing of the elements in the

event of low water condition and eliminates accidental dry firing.

•   SUS444 "Platinum" Tank                                                                                             

Patent product, not only can bear huge flow, but has no rust, no fouling characteristics, water quality reach the sanitary standard of drinking water. Do not need anode rod, so that avoiding expensive cost of replacement of anode rods each year.

• 50mm Non-CFC Foam Insulation                                

The thermal insulation layer of super thick, can reduce the heat loss of the water heater, energy saving.

• Color Galvanized Steel Shell

      Aluminum zinc coated steel surface after special treatment, increasing the corrosion proof, high temperature resistant, anti-oxidative function. Ensure that the water heater in use still maintain the original color and luster. many years later.                                                                                                            

• Incoloy Heating Element
  •    
    •    Magnetic Contactor

   Heavy duty UL rated for 100,000 cycles.                                                                                                                                         

•  A Built-in Fuse

All heating elements and circuits configure of fuses, providing complete electrical protection.

• Temperature and Pressure Relief Valve                                   

The water heater side is equipped with T&P relief valve, can automatic control temperature and pressure,make it more safety and reliable. Temperature set 99℃, rated pressure is 150Psi.

• Brass Drain Valve                                                            

The use of the quality and safety brass drain valve, use "no handle” design, preventing children or others inadvertently opened, more safety and reliable.    

●  ECO High Temperature Limit Switch

Mounted inside the immersion probe, used to prevent the water heater temperature is too high. The contacts in the 202℉ /94℃ off. At the same time, cut off the contactor and the electric heating element voltage